Deck Board, Framing & Footing Calculator

Size straight or 45-degree diagonal decking, ledger vs. freestanding 2x10 substructures, joist hangers, butyl tape, and concrete piers with live 2D framing drawings.

Estimate pressure-treated, cedar, and grooved composite deck boards, 2x10 joists, ZMAX hangers, ledger vs. freestanding drop beams, and concrete footing piers.

Frequently Asked Questions

Does composite decking require 12-inch or 16-inch on-center joist spacing?

Most grooved composite and PVC deck boards (such as Trex or TimberTech) are rated for 16-inch on-center joist spacing when laid perpendicular (straight) across joists, but require 12-inch on-center joist spacing when installed at a 45-degree diagonal because the diagonal span across 16-inch joists increases to 22.6 inches.

When must a backyard deck be freestanding instead of attached with a ledger board?

A deck must be built freestanding (with a second drop beam and concrete piers near the house wall) whenever the house rim joist is inaccessible, cantilevered, brick veneer, stone masonry, stucco over foam sheathing, or manufactured housing that cannot legally support structural lag/tension bolts.

How many 16-foot 5/4×6 deck boards cover 100 square feet?

A nominal 5/4×6 deck board measures 5.5 inches wide. Including a standard 3/16-inch drainage gap (5.6875-inch effective coverage), one 16-foot board covers 7.58 square feet. Therefore, 100 square feet requires 13.2 boards net, or 15 boards after a 10% straight-lay waste allowance (16 boards for 45-degree diagonal layouts).

How are concrete deck piers spaced along a dropped support beam?

Typical double or triple 2×10 / 2×12 dropped beams support post spacings between 6 and 8 feet depending on joist span and live-load tables (40 psf live + 10 psf dead load under IRC R507). Always verify exact beam and footing diameters against your local municipal span table and soil bearing capacity.

Why include joist butyl flashing tape on pressure-treated framing?

Applying self-adhering butyl flashing tape over the top edge of pressure-treated joists and double beams seals deck screw penetrations and blocks standing water between deck boards, extending framing lifespan to match 25-to-50-year composite decking warranties.