Concrete Slab, Patio & Footing Calculator

Compute exact ready-mix cubic yards, pre-mixed bag counts, crushed gravel base tonnage, rebar/mesh reinforcement, and instant client bid pricing.

Calculate exact cubic yards, 80lb/60lb concrete bags, compacted gravel tons, and #4 rebar grids for rectangular slabs, L-shaped patios, and Sonotube piers with a 2D scale plan.

Frequently Asked Questions

How do you calculate cubic yards of concrete for a slab or patio?

Multiply slab length in feet by width in feet by thickness in feet (thickness in inches divided by 12) to get cubic feet, then divide by 27 cubic feet per cubic yard. Always add a 5% to 10% waste allowance for subgrade variations and form deflection, then round ready-mix orders up to the nearest 0.25 cubic yard.

How many 80-lb or 60-lb bags of concrete equal 1 cubic yard?

One 80-lb pre-mixed concrete bag yields approximately 0.60 cubic feet, requiring 45 bags per cubic yard. One 60-lb bag yields 0.45 cubic feet, requiring 60 bags per cubic yard. For pours above 1.75 to 2.0 cubic yards, ordering ready-mix concrete is typically faster and more economical than hand-mixing bags.

What is a ready-mix concrete short-load fee?

Most ready-mix batch plants set a minimum full-load threshold between 4 and 5 cubic yards. Orders below 4.0 cubic yards usually incur a flat short-load or minimum-haul fee ($125 to $275). DraftYard automatically flags pours under 4.0 yd³ so contractors include the delivery surcharge in their client bid.

How much compacted gravel base is needed under a 4-inch concrete patio?

A standard 4-inch compacted crushed stone base (#57 or 3/4-inch minus road base) weighs roughly 1.4 tons per cubic yard compacted. A 20 ft × 14 ft (280 sq ft) slab at 4 inches of base depth requires 3.46 cubic yards, or approximately 4.9 to 5.5 tons of crushed aggregate.

Should I use #4 rebar or 6×6 wire mesh in a residential concrete driveway?

For passenger vehicle driveways and heavy patios, #4 (1/2-inch) deformed steel rebar tied on an 18-inch on-center grid resting on 2-inch plastic chairs keeps steel centered in the slab structurally. Welded 6×6 W1.4×W1.4 wire mesh is common for light walkways, provided crews pull or chair it up rather than letting it sit at the bottom during the pour.